ICTNWK305 Install and manage network protocols LMS 1

Knowledge Assessment

{`
  Unit code, name
  ICTNWK305 – Install and manage network protocols (1)
  Qualification/Course code, name
  ICT30118 - Certificate III in Information, Digital Media and Technology (2)
  TAFE NSW
  `}

Assessment instructions

Table 1 Assessment instructions

Assessment details	Instructions
Assessment overview	The objective of this assessment is to assess your knowledge as would be required to install and manage network protocols.
Assessment Event number	1 of 2
Instructions for this assessment	This is a written assessment and it will be assessing you on your knowledge of the unit. This assessment is in four parts: 1. Network protocol chart 2. Design an IP addressing scheme 3. Fill in the blanks 4. Short answer This assessment is supported by: · Assessment feedback
Submission instructions	When you have completed your assessment, submit it online for marking by your assessor. It is important that you keep a copy of all electronic and hardcopy assessments submitted to TAFE and complete the assessment declaration when submitting the assessment.
What do I need to do to achieve a satisfactory result?	To achieve a satisfactory result for this assessment all questions must be answered correctly.
What do I need to provide?	· Computer, internet and login details · USB drive or other storage method with enough free space to save work to.
What the assessor will provide?	Access to the Learning Management System.
Due date and time allowed	Indicative time to complete assessment: · 1.5 hours (90 minutes)
Supervision	Your assessor may ask for additional evidence to verify the authenticity of your submission and confirm that the assessment task was completed by you.
Reasonable adjustment	If you have a permanent or temporary condition that may prevent you from successfully completing the assessment event(s) in the way described, you should talk to your assessor about ‘reasonable adjustment’. This is the adjustment of the way you are assessed to take into account your condition, which must be approved BEFORE you attempt the assessment.
Assessment feedback, review or appeals	Appeals are addressed in accordance with Every Student’s Guide to Assessment in TAFE NSW.

Part 1: Network protocol chart (OSI and TCP/IP model)

Fill out the following OSI and TCP/IP model network protocol chart with the correct information. You must fill all the blank cells in columns A, B, C, D. Use the following terms to complete column D at the correct OSI layers. (Telnet, HTTP, FTP, IPv6, SMTP, TCP, POP3, UDP, DNS, DHCP, IPv4, TIA/EIA (RJ-45/T568), 802.11, Ethernet IEEE802.3, SSH).

Table 2 - Network Protocol Chart

A	B	C	D
OSI reference model Layer number and name	Protocol data unit (PDU)	TCP / IP model layer name	Protocols / Standards

Part 2: Design an IP addressing scheme

Scenario continued: You are given an IPv4 network address 192.168.100.0/24 to be used when designing the IP addressing scheme. ABC Company requires four subnetworks to facilitate their department functions and management of the network.

Identify the following information based on the given scenario.

Address class
Default subnet mask
Total number of subnets
Number of bits borrowed
Custom subnet mask
Number of usable host addresses per subnet

Design a network addressing scheme that allows for four Record the following information given below for each subnet.

Subnet 0
Network address:
First usable host:
Last usable host:
Broadcast address:

Subnet 1
Network address:
First usable host:
Last usable host:
Broadcast address:

Subnet 2
Network address:
First usable host:
Last usable host:
Broadcast address:

Subnet 3
Network address:
First usable host:
Last usable host:
Broadcast address:

For assessor completion only:	Part 2	Satisfactory ☐	Unsatisfactory ☐

Part 3: Fill in the blanks

Fill in the blanks with the correct network protocols and port numbers.

Protocol	Port Number
FTP
	22
DNS
HTTP
	110
	67, 68

Fill in the blanks, with the correct IPv4 first octet range and default subnet mask information according to the classful network architecture.

IPv4 class	First octet range	Default subnet mask
A	0 -
B
C
D		N/A
E	- 255	N/A

Part 4: Short answer

Summarise the features of the two major transmission control protocols and give an example of a use scenario for each.
1. UDP

Summarise the key features of the two major IP protocols.
1. IPv4

IPv6

Network protocols IPv4 and IPv6 would need to transcend (go beyond/scale with) organisational size and network complexity.Explain how you would allow for future growth of the organisation’s network and its complexity when designing IP addressing schemes.

Australia Universities

ACT

Australian Catholic University

Australian National University

Bond University

Central Queensland University

Charles Darwin University

Charles Sturt University

Curtin University of Technology

Deakin University

Edith Cowan University

Flinders University

Griffith University

Holmes Institute

James Cook University

La Trobe University

Macquarie University

Monash University

Murdoch University

Queensland University of Technology

RMIT University

Southern Cross University

Swinburne University of Technology

University of Adelaide

University of Ballarat

University of Canberra

University of Melbourne

University of Newcastle

University of New England

University of New South Wales

University of Notre Dame Australia

University of Queensland

University of South Australia

University of Southern Queensland

University of Sydney

University of Tasmania

University of Technology Sydney

University of the Sunshine Coast

University of Western Australia

University of Wollongong

Victoria University

Western Sydney University

Year 11 - 12 Certification Assignment

Australian Capital Territory Year 12 Certificate

HSC - Higher School Certificate

NTCE - Northern Territory Certificate of Education

QCE - Queensland Certificate of Education

SACE - South Australian Certificate of Education

TCE - Tasmanian Certificate of Education

VCE - Victorian Certificate of Education

WACE - Western Australia Certificate of Education